lingyuzeng/luci-app-openclaw
1
0
Fork 0
mirror of https://github.com/hotwa/luci-app-openclaw.git synced 2026-03-31 04:52:33 +00:00
Code Issues Packages Projects Releases 1 Wiki Activity

release: v1.0.14 — 备份管理增强、QQ 机器人、适配 v2026.3.8

Browse Source
This commit is contained in:
10000ge10000
2026-03-12 02:47:14 +08:00
parent de8b2ade80
commit a99283aee2
11 changed files with 792 additions and 29 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
root/usr/bin/openclaw-env
View File

@@ -13,7 +13,7 @@ set -e
NODE_VERSION="${NODE_VERSION:-22.16.0}"
# 经过验证的 OpenClaw 稳定版本 (更新此值需同步测试)
OC_TESTED_VERSION="2026.3.2"
OC_TESTED_VERSION="2026.3.8"
# 用户可通过 OC_VERSION 环境变量覆盖安装版本
OC_VERSION="${OC_VERSION:-}"
NODE_BASE="/opt/openclaw/node"

295
root/usr/share/openclaw/oc-config.sh
View File

@@ -404,7 +404,14 @@ show_current_config() {
local dc_token=$(json_get channels.discord.botToken)
local fs_appid=$(json_get channels.feishu.appId)
local sk_token=$(json_get channels.slack.botToken)
local qq_appid=$(json_get channels.qqbot.appId)
if [ -n "$qq_appid" ]; then
local qq_short=$(echo "$qq_appid" | cut -c1-8)
echo -e "${GREEN}│${NC} QQ (qqbot) ......... ${GREEN}✅ 已配置${NC} (AppID: ${qq_short}...)"
else
echo -e "${GREEN}│${NC} QQ (qqbot) ......... ${YELLOW}❌ 未配置${NC}"
fi
if [ -n "$tg_token" ]; then
local tg_short=$(echo "$tg_token" | cut -c1-12)
echo -e "${GREEN}│${NC} Telegram ............ ${GREEN}✅ 已配置${NC} (${tg_short}...)"
@@ -1180,6 +1187,128 @@ set_active_model() {
fi
}
# ══════════════════════════════════════════════════════════════
# 配置 QQ 机器人 (通过 qqbot 插件 @tencent-connect/openclaw-qqbot)
# ══════════════════════════════════════════════════════════════
configure_qq() {
echo ""
echo -e " ${BOLD}🐧 QQ 机器人配置${NC}"
echo ""
# 检查 qqbot 插件是否已安装
local plugin_installed=0
if [ -n "$OC_ENTRY" ] && [ -x "$NODE_BIN" ]; then
local plugin_check=$(oc_cmd plugins list 2>/dev/null | grep -i "qqbot" | grep -i "loaded\|disabled")
if [ -n "$plugin_check" ]; then
plugin_installed=1
echo -e " ${GREEN}✅ qqbot 插件已安装${NC}"
fi
fi
if [ "$plugin_installed" -eq 0 ]; then
echo -e " ${YELLOW}⚠️ qqbot 插件尚未安装${NC}"
echo -e " QQ 渠道需要先安装 qqbot 插件才能使用。"
echo ""
prompt_with_default "是否立即安装 qqbot 插件? (y/n)" "y" install_qqbot
if confirm_yes "$install_qqbot"; then
echo -e " ${CYAN}正在安装 @tencent-connect/openclaw-qqbot ...${NC}"
echo -e " ${DIM}(首次安装可能需要几分钟)${NC}"
local install_out
install_out=$(oc_cmd plugins install @tencent-connect/openclaw-qqbot@latest 2>&1)
local install_rc=$?
if [ $install_rc -eq 0 ]; then
echo -e " ${GREEN}✅ qqbot 插件安装成功${NC}"
plugin_installed=1
else
echo -e " ${RED}❌ 插件安装失败 (exit: $install_rc)${NC}"
echo -e " ${DIM}${install_out}${NC}" | tail -5
echo ""
echo -e " ${YELLOW}请手动安装: openclaw plugins install @tencent-connect/openclaw-qqbot@latest${NC}"
return
fi
else
echo -e " ${YELLOW}已跳过插件安装。请先安装 qqbot 插件后再配置。${NC}"
echo -e " ${CYAN}安装命令: openclaw plugins install @tencent-connect/openclaw-qqbot@latest${NC}"
return
fi
fi
echo ""
echo -e " ${YELLOW}获取 App ID 和 App Secret 步骤:${NC}"
echo -e " 1. 前往 ${CYAN}QQ 开放平台${NC}: ${CYAN}https://q.qq.com/qqbot/openclaw/login.html${NC}"
echo -e " 2. 用手机 QQ 扫码注册/登录"
echo -e " 3. 进入 QQ 机器人页面 → 点击「创建机器人」"
echo -e " 4. 创建完成后，复制页面中的 ${CYAN}App ID${NC} 和 ${CYAN}App Secret${NC}"
echo ""
echo -e " ${RED}⚠️ 注意: App Secret 不支持二次查看（会强制重置），请妥善保存！${NC}"
echo ""
local current_appid=$(json_get channels.qqbot.appId)
if [ -n "$current_appid" ]; then
echo -e " ${GREEN}当前已配置 App ID: ${current_appid}${NC}"
fi
prompt_with_default "请输入 QQ 机器人 App ID" "" qq_appid
prompt_with_default "请输入 QQ 机器人 App Secret" "" qq_secret
qq_appid=$(sanitize_input "$qq_appid" | tr -d '[:space:]')
qq_secret=$(sanitize_input "$qq_secret" | tr -d '[:space:]')
if [ -n "$qq_appid" ] && [ -n "$qq_secret" ]; then
# App ID 应为纯数字
if ! printf '%s' "$qq_appid" | grep -qE '^[0-9]+$'; then
echo -e " ${RED}❌ App ID 格式错误，应为纯数字${NC}"
return
fi
# App Secret 基本格式检查 (非空即可，长度通常 32 位)
if [ ${#qq_secret} -lt 10 ]; then
echo -e " ${YELLOW}⚠️ App Secret 长度过短（${#qq_secret} 字符），请确认是否完整粘贴。${NC}"
prompt_with_default "是否仍然保存? (y/n)" "n" force_save
if ! confirm_yes "$force_save"; then
echo -e " ${YELLOW}已取消，配置未保存。${NC}"
return
fi
fi
# 使用 openclaw CLI 一键配置 (推荐方式)
echo -e " ${CYAN}正在配置 qqbot 渠道...${NC}"
local add_out
add_out=$(oc_cmd channels add --channel qqbot --token "${qq_appid}:${qq_secret}" 2>&1)
local add_rc=$?
if [ $add_rc -ne 0 ]; then
echo -e " ${YELLOW}CLI 配置未成功，尝试直接写入配置文件...${NC}"
# 回退: 直接写入 JSON 配置
json_set channels.qqbot.enabled true
json_set channels.qqbot.appId "$qq_appid"
json_set channels.qqbot.clientSecret "$qq_secret"
chown openclaw:openclaw "$CONFIG_FILE" 2>/dev/null || true
fi
# 保存后验证
local saved_appid=$(json_get channels.qqbot.appId)
if [ -z "$saved_appid" ]; then
echo -e " ${RED}❌ 配置保存异常! 请检查配置文件${NC}"
return
fi
echo -e " ${GREEN}✅ QQ 机器人配置已保存${NC}"
echo -e " ${CYAN} App ID: ${qq_appid}${NC}"
echo ""
echo -e " ${YELLOW}提示:${NC}"
echo -e " • 配置完成后需重启 Gateway 使配置生效"
echo -e " • 如果机器人回复「该机器人去火星了」，请检查 App ID 和 App Secret 是否正确"
echo -e " • 当前不建议将 QQ 机器人添加进 QQ 群聊"
echo -e " • 插件升级: ${CYAN}openclaw plugins update openclaw-qqbot${NC}"
echo ""
# 重启 Gateway 使配置生效
ask_restart
else
echo -e " ${YELLOW}信息不完整，已取消。${NC}"
fi
}
# ══════════════════════════════════════════════════════════════
# 配置 Telegram
# ══════════════════════════════════════════════════════════════
@@ -1435,23 +1564,25 @@ configure_channels() {
echo ""
echo -e " ${BOLD}📡 配置消息渠道${NC}"
echo ""
echo -e " ${CYAN}1)${NC} Telegram ${GREEN}(最常用，推荐)${NC}"
echo -e " ${CYAN}2)${NC} Discord"
echo -e " ${CYAN}3)${NC} 飞书 (Feishu)"
echo -e " ${CYAN}4)${NC} Slack"
echo -e " ${CYAN}5)${NC} WhatsApp ${YELLOW}(需通过 Web 控制台扫码)${NC}"
echo -e " ${CYAN}6)${NC} Telegram 配对助手"
echo -e " ${CYAN}7)${NC} 官方完整渠道配置向导"
echo -e " ${CYAN}1)${NC} QQ 机器人 ${GREEN}(腾讯QQ，推荐国内用户)${NC}"
echo -e " ${CYAN}2)${NC} Telegram ${GREEN}(最常用，推荐)${NC}"
echo -e " ${CYAN}3)${NC} Discord"
echo -e " ${CYAN}4)${NC} 飞书 (Feishu)"
echo -e " ${CYAN}5)${NC} Slack"
echo -e " ${CYAN}6)${NC} WhatsApp ${YELLOW}(需通过 Web 控制台扫码)${NC}"
echo -e " ${CYAN}7)${NC} Telegram 配对助手"
echo -e " ${CYAN}8)${NC} 官方完整渠道配置向导"
echo -e " ${CYAN}0)${NC} 返回主菜单"
echo ""
prompt_with_default "请选择" "1" ch_choice
case "$ch_choice" in
1) configure_telegram ;;
2) configure_discord ;;
3) configure_feishu ;;
4) configure_slack ;;
5)
1) configure_qq ;;
2) configure_telegram ;;
3) configure_discord ;;
4) configure_feishu ;;
5) configure_slack ;;
6)
echo ""
echo -e " ${YELLOW}WhatsApp 需要通过 Web 控制台扫码配对:${NC}"
local gw_token=$(json_get gateway.auth.token)
@@ -1460,8 +1591,8 @@ configure_channels() {
echo -e " ${CYAN}http://<你的路由器IP>:${gw_port}/?token=${gw_token}${NC}"
echo -e " 打开后进入 Channels → WhatsApp 扫码即可。"
;;
6) telegram_pairing ;;
7)
7) telegram_pairing ;;
8)
echo ""
echo -e " ${CYAN}启动官方渠道配置向导...${NC}"
(oc_cmd configure --section channels) || echo -e " ${YELLOW}配置向导已退出${NC}"
@@ -1777,6 +1908,128 @@ reset_to_defaults() {
# ══════════════════════════════════════════════════════════════
# 主菜单
# ══════════════════════════════════════════════════════════════
# ══════════════════════════════════════════════════════════════
# 备份/还原配置菜单 (v2026.3.8+ openclaw backup create/verify)
# ══════════════════════════════════════════════════════════════
backup_restore_menu() {
echo ""
echo -e " ${BOLD}💾 备份/还原配置${NC}"
echo ""
echo -e " ${CYAN}1)${NC} 创建配置备份 (仅配置文件)"
echo -e " ${CYAN}2)${NC} 创建完整备份 (配置 + 状态数据)"
echo -e " ${CYAN}3)${NC} 验证最新备份"
echo -e " ${CYAN}4)${NC} 查看备份列表"
echo -e " ${CYAN}5)${NC} 从最新备份恢复配置"
echo -e " ${CYAN}0)${NC} 返回主菜单"
echo ""
prompt_with_default "请选择" "1" backup_choice
# 备份目录 (openclaw backup create 输出到 CWD)
local backup_dir="${OC_STATE_DIR}/backups"
mkdir -p "$backup_dir" 2>/dev/null
case "$backup_choice" in
1)
echo -e " ${CYAN}正在创建配置备份...${NC}"
local out
out=$(cd "$backup_dir" && oc_cmd backup create --only-config --no-include-workspace 2>&1)
local rc=$?
echo "$out"
if [ $rc -eq 0 ] && echo "$out" | grep -q "\.tar\.gz"; then
echo -e " ${GREEN}✅ 配置备份已创建${NC}"
else
echo -e " ${YELLOW}⚠️ 备份功能需要 OpenClaw v2026.3.8+${NC}"
echo -e " ${DIM}如果备份命令不可用，可手动备份: cp ${CONFIG_FILE} ${CONFIG_FILE}.bak${NC}"
fi
;;
2)
echo -e " ${CYAN}正在创建完整备份...${NC}"
echo -e " ${DIM}(包含配置和状态数据，可能需要较长时间)${NC}"
local out
out=$(cd "$backup_dir" && HOME="$backup_dir" oc_cmd backup create --no-include-workspace 2>&1)
local rc=$?
echo "$out"
# 完整备份可能输出到 HOME，尝试移动到 backup_dir
for f in "${OC_DATA}"/*-openclaw-backup.tar.gz; do
[ -f "$f" ] && mv "$f" "$backup_dir/" 2>/dev/null
done
if [ $rc -eq 0 ] && echo "$out" | grep -q "\.tar\.gz"; then
echo -e " ${GREEN}✅ 完整备份已创建${NC}"
else
echo -e " ${YELLOW}⚠️ 备份失败${NC}"
echo -e " ${DIM}提示: 如果配置文件有校验警告，完整备份可能受限。请使用选项 1 (仅配置文件) 备份${NC}"
fi
;;
3)
local latest=$(ls -t "${backup_dir}"/*-openclaw-backup.tar.gz 2>/dev/null | head -1)
if [ -z "$latest" ]; then
# 也检查旧位置
latest=$(ls -t "${OC_STATE_DIR}"/*-openclaw-backup.tar.gz "${OC_DATA}"/*-openclaw-backup.tar.gz 2>/dev/null | head -1)
fi
if [ -z "$latest" ]; then
echo -e " ${YELLOW}未找到备份文件，请先创建备份${NC}"
else
echo -e " ${CYAN}验证备份: ${latest}${NC}"
oc_cmd backup verify "$latest" 2>&1
fi
;;
4)
echo ""
if [ -d "$backup_dir" ]; then
local count=$(ls "${backup_dir}"/*-openclaw-backup.tar.gz 2>/dev/null | wc -l)
if [ "$count" -gt 0 ] 2>/dev/null; then
echo -e " ${BOLD}备份文件列表:${NC}"
ls -lh "${backup_dir}"/*-openclaw-backup.tar.gz 2>/dev/null | while read line; do
echo -e " ${DIM}${line}${NC}"
done
else
echo -e " ${YELLOW}暂无备份文件${NC}"
fi
else
echo -e " ${YELLOW}暂无备份文件${NC}"
fi
echo ""
echo -e " ${DIM}备份目录: ${backup_dir}${NC}"
;;
5)
local latest=$(ls -t "${backup_dir}"/*-openclaw-backup.tar.gz 2>/dev/null | head -1)
if [ -z "$latest" ]; then
echo -e " ${YELLOW}未找到备份文件，请先创建备份${NC}"
else
echo -e " ${CYAN}将从以下备份恢复:${NC}"
echo -e " ${DIM}${latest}${NC}"
echo ""
echo -e " ${YELLOW}⚠️ 这会覆盖当前的 openclaw.json 配置！${NC}"
prompt_with_default "确认恢复? (y/N)" "N" confirm_restore
if [ "$confirm_restore" = "y" ] || [ "$confirm_restore" = "Y" ]; then
# 备份当前配置
cp -f "$CONFIG_FILE" "${CONFIG_FILE}.pre-restore" 2>/dev/null
# 从 tar.gz 中提取 openclaw.json
local tmp_json="${CONFIG_FILE}.tmp"
tar -xzf "$latest" --wildcards '*/openclaw.json' -O > "$tmp_json" 2>/dev/null
if [ -s "$tmp_json" ] && "$NODE_BIN" -e "JSON.parse(require('fs').readFileSync('${tmp_json}','utf8'))" 2>/dev/null; then
mv -f "$tmp_json" "$CONFIG_FILE"
chown openclaw:openclaw "$CONFIG_FILE" 2>/dev/null
echo -e " ${GREEN}✅ 配置已恢复！原配置已保存为 openclaw.json.pre-restore${NC}"
echo ""
prompt_with_default "是否重启服务使配置生效? (Y/n)" "Y" do_restart
if [ "$do_restart" != "n" ] && [ "$do_restart" != "N" ]; then
restart_gateway
fi
else
rm -f "$tmp_json"
echo -e " ${RED}❌ 备份中的配置文件无效，恢复已取消${NC}"
fi
else
echo -e " ${DIM}已取消${NC}"
fi
fi
;;
0|"") return ;;
*) echo -e " ${YELLOW}无效选择${NC}" ;;
esac
}
main_menu() {
while true; do
echo ""
@@ -1787,11 +2040,12 @@ main_menu() {
echo -e " ${CYAN}1)${NC} 📋 查看当前配置"
echo -e " ${CYAN}2)${NC} 🤖 配置 AI 模型提供商"
echo -e " ${CYAN}3)${NC} 🔄 设定当前活跃模型"
echo -e " ${CYAN}4)${NC} 📡 配置消息渠道 (Telegram/Discord/飞书/Slack)"
echo -e " ${CYAN}4)${NC} 📡 配置消息渠道 (QQ/Telegram/Discord/飞书/Slack)"
echo -e " ${CYAN}5)${NC} 🔍 健康检查 / 诊断"
echo -e " ${CYAN}6)${NC} 🔄 重启 Gateway"
echo -e " ${CYAN}7)${NC} 📝 查看原始配置文件"
echo -e " ${CYAN}8)${NC} ⚠️ 恢复默认配置"
echo -e " ${CYAN}8)${NC} 💾 备份/还原配置"
echo -e " ${CYAN}9)${NC} ⚠️ 恢复默认配置"
echo -e " ${CYAN}0)${NC} 退出"
echo ""
prompt_with_default "请选择" "1" menu_choice
@@ -1819,7 +2073,8 @@ main_menu() {
ask_restart
fi
;;
8) reset_to_defaults ;;
8) backup_restore_menu ;;
9) reset_to_defaults ;;
0)
echo -e " ${GREEN}再见！${NC}"
exit 0
@@ -1850,6 +2105,12 @@ case "${1:-}" in
--restart)
restart_gateway
;;
--backup)
bk_dir="${OC_STATE_DIR}/backups"
mkdir -p "$bk_dir" 2>/dev/null
echo -e "${CYAN}正在创建配置备份...${NC}"
cd "$bk_dir" && oc_cmd backup create --only-config --no-include-workspace 2>&1
;;
--status)
show_current_config
health_check